Suspended Ceiling Contractors FAQs
Straight answers to the questions we're asked most.
What is a suspended ceiling?
A suspended ceiling is a secondary ceiling hung below the structural ceiling on wire or rod hangers. The gap above, called the ceiling void, hides pipes, ducts and cables while keeping them accessible. The two main types are exposed grid ceilings with lift-out tiles and concealed MF ceilings boarded with plasterboard.
How much does a suspended ceiling cost per square metre?
A standard grid ceiling with mineral tiles typically costs £22 to £38 per square metre installed. Acoustic or premium tiles raise this to £35 to £60. MF plasterboard ceilings usually cost £40 to £70 per square metre. Small rooms cost more per square metre because set-up time is the same.
What size are suspended ceiling tiles?
The most common size in the UK is 600 x 600 mm, which fits a standard 24 mm grid. 1200 x 600 mm tiles are also widely used, especially with LED panels. Tiles come in square edge, which sits flush with the grid, and tegular edge, which drops slightly below it for a more refined look.
How long does it take to install a suspended ceiling?
On an open floor, a team can install 80 to 150 square metres of grid ceiling a day. MF plasterboard ceilings are slower, with 30 to 60 square metres boarded a day plus finishing. Integration of lights and services, access and furniture all affect how long the job takes.
Can you put a suspended ceiling in a house?
Yes. MF plasterboard ceilings are common in homes, especially under uneven joists, in basements, conversions and extensions. Exposed grid ceilings are less common at home but practical in garages, workshops and basements where services need regular access. Ceiling height must still meet comfort and any Building Regulations requirements.
How much space does a suspended ceiling need?
The minimum void depth is usually around 100 to 150 mm for a grid ceiling, allowing room to tilt tiles in and out. More depth is needed for recessed lights, air-conditioning units and ductwork. MF ceilings can be fitted with a smaller void, from around 50 mm below the structure.
Can I replace just a few ceiling tiles?
Yes. Damaged or stained tiles can be swapped individually if you can match the size, edge type and pattern. New tiles may look brighter than aged neighbours, so some people replace all tiles in a room for a uniform finish. Fix the cause of any water staining first.
Do suspended ceiling tiles contain asbestos?
Some older tiles do. Tiles installed before 2000, particularly insulation board tiles, may contain asbestos. Modern mineral fibre tiles do not. If your building predates 2000 and has no asbestos survey, have suspect tiles tested before they are removed or disturbed, as required under asbestos regulations.
What is an MF ceiling?
An MF ceiling is a concealed suspended ceiling system using metal furring sections hung from primary channels, which are then boarded with plasterboard. The finished result looks like a standard plastered ceiling. MF ceilings are used to create a flat, level surface beneath uneven or exposed structures.
Are suspended ceilings good for acoustics?
Yes. Acoustic ceiling tiles absorb sound and reduce echo, improving speech clarity in offices, classrooms and restaurants. Tiles are rated by absorption class from A, the best, to E. To stop sound passing between rooms through the void, higher-density tiles and barriers above partitions are used.
Can lights be fitted in a suspended ceiling?
Yes. LED panels drop directly into the grid in place of a tile, and downlights, sensors, speakers and air-conditioning grilles can be cut in or framed. Heavier fittings need independent support so they do not overload the grid. An electrician connects the lighting after the grid is installed.
Can suspended ceilings be fire rated?
Some suspended ceiling systems are tested to provide fire resistance as a complete assembly, but most standard grid ceilings are not. Where fire resistance is needed, the specification must use a tested system installed exactly as designed. Tiles and boards must also meet surface spread of flame requirements for the building use.
Get a free suspended ceiling contractors quote
Tell us what you need and we'll come back with a clear price.
Request a quote