Suspended Ceiling Contractors

Suspended Ceiling Contractors

Grid Ceiling Installation

Exposed grid ceilings with 600 x 600 or 1200 x 600 mm lay-in tiles, levelled by laser and hung on adjustable hangers.

Free Suspended Ceiling Contractors quote

No obligation. We only use your details to reply about this job.

Grid Ceiling Installation — Suspended Ceiling Contractors

What's involved

The fixer starts by setting a datum with a rotating laser and fixing perimeter angle trim around the walls at the finished height. Hangers, usually galvanised wire or threaded rod with adjustable clips, are fixed to the soffit at roughly 1200 mm centres using fixings suitable for concrete, steel or timber. Main runners hang from these, with 1200 mm and 600 mm cross tees clipped between them to form the grid. Tiles are laid in last, after lighting and services are positioned. Standard grids are 24 mm or slimline 15 mm, in white or colours. A competent team can install 80 to 150 square metres a day on an open floor. You need to confirm the finished ceiling height, lighting layout and any services that must stay accessible.

How we handle it

  1. Share your project

    Use the quote form to tell us the building type, floor area, ceiling type wanted and any timing constraints. Drawings or photos of the existing ceiling help us brief the right contractor.

  2. Survey and specification

    A contractor surveys the soffit, checks heights, services and access, and recommends the grid, tile or board system. You receive a fixed written price.

  3. Set out and hang

    The ceiling height is set by laser, perimeter trim fixed and hangers installed into the structure at the correct centres.

  4. Grid, board and integrate

    Main runners and cross tees or MF channels are installed, services and lights coordinated, then tiles laid or plasterboard fixed and finished.

  5. Clean and hand over

    Tiles are checked for alignment, fittings tested by the relevant trades, waste removed and the area cleaned ready for occupation.

Price guide

Suspended ceiling prices are usually quoted per square metre and depend on the system, tile specification, ceiling height and how much lighting and services integration is needed. Small areas cost more per square metre because setting up takes the same time. Night or weekend working is priced separately. Every quote is fixed after survey.

  • MF plasterboard ceiling: £40–£70 per m². Concealed metal frame, plasterboard, taping or skim finish, excluding decoration.
  • Acoustic or premium tile ceiling: £35–£60 per m². High-absorption, tegular or hygienic tiles in a new grid.
  • Standard grid ceiling with tiles: £22–£38 per m². 24 mm white grid and standard mineral tiles on an open floor at normal height.

Questions about grid ceiling installation

What is a suspended ceiling?

A suspended ceiling is a secondary ceiling hung below the structural ceiling on wire or rod hangers. The gap above, called the ceiling void, hides pipes, ducts and cables while keeping them accessible. The two main types are exposed grid ceilings with lift-out tiles and concealed MF ceilings boarded with plasterboard.

How much does a suspended ceiling cost per square metre?

A standard grid ceiling with mineral tiles typically costs £22 to £38 per square metre installed. Acoustic or premium tiles raise this to £35 to £60. MF plasterboard ceilings usually cost £40 to £70 per square metre. Small rooms cost more per square metre because set-up time is the same.

What size are suspended ceiling tiles?

The most common size in the UK is 600 x 600 mm, which fits a standard 24 mm grid. 1200 x 600 mm tiles are also widely used, especially with LED panels. Tiles come in square edge, which sits flush with the grid, and tegular edge, which drops slightly below it for a more refined look.

Get a free suspended ceiling contractors quote

Tell us what you need and we'll come back with a clear price.

Request a quote