Suspended Ceiling Contractors

Suspended Ceiling Contractors

Acoustic Ceiling Upgrades

High-absorption mineral fibre, glass wool or acoustic plasterboard ceilings to reduce echo and noise in offices, schools and studios.

Free Suspended Ceiling Contractors quote

No obligation. We only use your details to reply about this job.

Acoustic Ceiling Upgrades — Suspended Ceiling Contractors

What's involved

Hard ceilings make rooms echo, which harms speech clarity in offices, classrooms and restaurants. Acoustic tiles are rated by their sound absorption, expressed as an absorption class from A, the best, to E, and by sound attenuation, which affects noise between rooms sharing a ceiling void. High-absorption glass wool or mineral tiles in class A or B dramatically cut reverberation. For privacy between meeting rooms, higher-density tiles and plenum barriers above partitions stop sound travelling across the void. Perforated acoustic plasterboard offers a plain, jointless look in MF ceilings. The fixer can usually reuse a sound grid and simply swap tiles. A typical office upgrade takes one to two days. You need to tell the contractor the room use, so absorption and privacy needs are balanced.

How we handle it

  1. Share your project

    Use the quote form to tell us the building type, floor area, ceiling type wanted and any timing constraints. Drawings or photos of the existing ceiling help us brief the right contractor.

  2. Survey and specification

    A contractor surveys the soffit, checks heights, services and access, and recommends the grid, tile or board system. You receive a fixed written price.

  3. Set out and hang

    The ceiling height is set by laser, perimeter trim fixed and hangers installed into the structure at the correct centres.

  4. Grid, board and integrate

    Main runners and cross tees or MF channels are installed, services and lights coordinated, then tiles laid or plasterboard fixed and finished.

  5. Clean and hand over

    Tiles are checked for alignment, fittings tested by the relevant trades, waste removed and the area cleaned ready for occupation.

Price guide

Suspended ceiling prices are usually quoted per square metre and depend on the system, tile specification, ceiling height and how much lighting and services integration is needed. Small areas cost more per square metre because setting up takes the same time. Night or weekend working is priced separately. Every quote is fixed after survey.

  • MF plasterboard ceiling: £40–£70 per m². Concealed metal frame, plasterboard, taping or skim finish, excluding decoration.
  • Ceiling tile replacement: £8–£20 per tile. Supply and fit of matching replacement tiles in an existing grid.
  • Strip out of existing ceiling: £6–£12 per m². Removing tiles, grid and hangers and disposing of non-hazardous waste.

Questions about acoustic ceiling upgrades

What is a suspended ceiling?

A suspended ceiling is a secondary ceiling hung below the structural ceiling on wire or rod hangers. The gap above, called the ceiling void, hides pipes, ducts and cables while keeping them accessible. The two main types are exposed grid ceilings with lift-out tiles and concealed MF ceilings boarded with plasterboard.

How much does a suspended ceiling cost per square metre?

A standard grid ceiling with mineral tiles typically costs £22 to £38 per square metre installed. Acoustic or premium tiles raise this to £35 to £60. MF plasterboard ceilings usually cost £40 to £70 per square metre. Small rooms cost more per square metre because set-up time is the same.

What size are suspended ceiling tiles?

The most common size in the UK is 600 x 600 mm, which fits a standard 24 mm grid. 1200 x 600 mm tiles are also widely used, especially with LED panels. Tiles come in square edge, which sits flush with the grid, and tegular edge, which drops slightly below it for a more refined look.

Get a free suspended ceiling contractors quote

Tell us what you need and we'll come back with a clear price.

Request a quote